Cisco ICND2 – Configure Network Address Translation for given network requirements using CLI

Chris Stark Cisco, ICND2

Showing examples of Dynamic, Static and Nat overload.

NAT

Configuring NAT Overload on Router1:

interface FastEthernet0/0
ip address 10.0.0.1 255.255.255.224
ip nat inside

interface Serial0/1/0
ip address 62.0.0.2 255.255.255.0
ip nat outside

ip nat pool natpool 62.0.0.2 62.0.0.2 netmask 255.255.255.0
ip nat inside source list 1 pool natpool overload

access-list 1 permit 10.0.0.0 0.0.0.31

Configuring Static NAT on Router1:

interface FastEthernet0/0
ip address 10.0.0.1 255.255.255.224
ip nat inside

interface Serial0/1/0
ip address 62.0.0.2 255.255.255.0
ip nat outside

ip nat inside source static 10.0.0.2 62.0.0.2
ip nat inside source static 10.0.0.3 62.0.0.4

Configuring Dynamic NAT on Router1:

interface FastEthernet0/0
ip address 10.0.0.1 255.255.255.224
ip nat inside

interface Serial0/1/0
ip address 62.0.0.2 255.255.255.0
ip nat outside

ip nat pool natpool 62.0.0.3 62.0.0.4 netmask 255.255.255.0
ip nat inside source list 1 pool natpool

access-list 1 permit 10.0.0.0 0.0.0.31